An important advantage of having your home security system set up by professionals is that you hardly ever have to worry about it. Even so, there may be a few instances when you must reset your alarms in Fort Myers. When using a smart command interface, resetting normally requires just a couple taps of the touchscreen following a false alarm, power outage, or battery change.
Check Your Owner’s Manual Before Resetting Your Alarm
One note of caution before you try to reset your Fort Myers home security system, read your manual prior to proceeding. You don't want to undermine your system due to pressing something incorrectly. Additionally, your system might have changed if you upgraded from a number pad to a modernized touchscreen interface. Keep in mind that if you’re unable to figure out how to reset your system, don't be reluctant to reach out to the professionals.
Resetting Your Fort Myers Security System Because Of A False Alarm
Usually, a false alarm takes place because of an accidentally tripped sensor. You may engage the central hub or access the ADT mobile app and touch the shield image and enter your unique passcode to deactivate the system for these instances. You could receive notification from your monitoring professionals, but simply inform them that you experienced a false alarm.
Resetting Your Alarm After A Power Outage In Fort Myers
If the power goes out because of high winds or other factors, you might start hearing a beeping sound from your control panel. This lets you know that your security is being powered by the battery backup. To reset your unit and silence the constant chirping, you need to deactivate and reactivate your system.
Keep in mind, if your power outage lasts for a longer period of time, you may need a total reset of your home’s security. Heed the directives in your user’s handbook -- normally by entering your code and hitting the designated button twice -- and you should be back to normal. You might still hear chirping caused by the secondary power source, as it’s possible it won’t end until your battery is fully charged. Contact your home security specialists if you continue to have problems with your ADT equipment 20 hours after the power is resumed.
Reset Your Home Security System After Replacing A Battery
There will be infrequent times when you must change a battery powering one of the devices in your security installation. In order to accomplish this, you will change your system to "Test Mode" so you avoid triggering a false alarm. When the you replace the old battery, remove the system out of Test Mode and restore normal operations. If the command center doesn't recognize the component or the battery light remains on, you might require a whole system reset.
Tips to Reset Your Fort Myers Security System After Adding Or Deleting A Code
The addition and deletion of personal codes can be completed on your ADT Command hub and your ADT mobile app. You shouldn't need a resetting of your system following the addition or deletion of codes. However, if you find yourself moving to a new home already equipped with an ADT system, you should call your residential security experts at (239) 317-1360 to establish a new contract. The technician will go on site to switch out equipment, place more components (if necessary), and perform a full reset.
An Easy-To-Use Security System Is Only A Call Away
Attempting to reset a home security system in Fort Myers can be difficult if it isn’t equipped with understandable devices and controls. If the time has come to find your intuitive alarm system, call (239) 317-1360 or send in the form below. Our team is happy to customize the right security system for your residence.